| |
Main
Date: 13 Dec 2006 20:22:28
From: Ange1o DePa1ma
Subject: 32 or 64 bit?
|
I have Shredder 7 and am about to install the Rybka 2.2 engine but I don't
know if my setup is 32 bit or 64 bit? Does anyone know how to tell?
THanks,
Angelo
|
|
| |
Date: 29 Dec 2006 09:24:55
From: Jason911
Subject: Re: 32 or 64 bit?
|
First, try to determine if you're using a Mac or a PC. After that, find out
if the earth is flat or not.
JMR
"Ange1o DePa1ma" <[email protected] > wrote in message
news:[email protected]...
>I have Shredder 7 and am about to install the Rybka 2.2 engine but I don't
>know if my setup is 32 bit or 64 bit? Does anyone know how to tell?
>
> THanks,
>
> Angelo
>
|
| | |
Date: 02 Jan 2007 21:45:50
From: Thomas T. Veldhouse
Subject: Re: 32 or 64 bit?
|
Jason911 <[email protected] > wrote:
> First, try to determine if you're using a Mac or a PC. After that, find out
> if the earth is flat or not.
>
Was that supposed to be funny?
--
Thomas T. Veldhouse
Key Fingerprint: D281 77A5 63EE 82C5 5E68 00E4 7868 0ADC 4EFB 39F0
|
| | | |
Date: 02 Jan 2007 17:25:58
From: Ange1o DePa1ma
Subject: Re: 32 or 64 bit?
|
"Thomas T. Veldhouse" <[email protected] > wrote in message
news:[email protected]...
> Jason911 <[email protected]> wrote:
>> First, try to determine if you're using a Mac or a PC. After that, find
>> out
>> if the earth is flat or not.
>>
>
> Was that supposed to be funny?
I don't think so.
BTW I'm still trying to figure out if I have a Mac or a PC. Should I look
under the keyboard?
|
| |
Date: 15 Dec 2006 14:56:06
From: Thomas T. Veldhouse
Subject: Re: 32 or 64 bit?
|
Ange1o DePa1ma <[email protected] > wrote:
> I have Shredder 7 and am about to install the Rybka 2.2 engine but I don't
> know if my setup is 32 bit or 64 bit? Does anyone know how to tell?
>
Shredder 7 is 32-bit, there is no 64-bit version of it. You are safe to
conclude it is 32-bit.
As far as your machine, unless you have Windows XP 64-bit (assuming windows),
you won't be able to use a 64-bit binary anyway. As for Rybka, I assume you
just purchased it, so you should know if you purchased 32-bit or 64-bit.
--
Thomas T. Veldhouse
Key Fingerprint: D281 77A5 63EE 82C5 5E68 00E4 7868 0ADC 4EFB 39F0
|
| |
Date: 13 Dec 2006 18:40:50
From:
Subject: Re: 32 or 64 bit?
|
You have 32-bit. If you had 64-bit you'd know. You need Windows x64
as your operating system, and that is expensive enough that you
couldn't forget it.
|
| | |
Date: 14 Dec 2006 14:20:06
From: Thomas T. Veldhouse
Subject: Re: 32 or 64 bit?
|
[email protected] wrote:
> You have 32-bit. If you had 64-bit you'd know. You need Windows x64
> as your operating system, and that is expensive enough that you
> couldn't forget it.
>
True, but that doesn't tell you if the engine was compiled as 32-bit or
64-bit. You have to check what libraries it links too [assuming they are not
all staticly linked].
--
Thomas T. Veldhouse
Key Fingerprint: D281 77A5 63EE 82C5 5E68 00E4 7868 0ADC 4EFB 39F0
|
| | | |
Date: 15 Dec 2006 00:17:12
From: Ange1o DePa1ma
Subject: Re: 32 or 64 bit?
|
Thanks very much to all responders.
Angelo
|
| |
Date: 13 Dec 2006 18:49:11
From: Chet Marino
Subject: Re: 32 or 64 bit?
|
Most likely 32... I just installed mine last night.
On Wed, 13 Dec 2006 20:22:28 -0500, "Ange1o DePa1ma"
<[email protected] > wrote:
>I have Shredder 7 and am about to install the Rybka 2.2 engine but I don't
>know if my setup is 32 bit or 64 bit? Does anyone know how to tell?
>
>THanks,
>
>Angelo
>
Chet ino
Westminster, CO
|
|
